mBot varuosad ja andurid

Me puuteandur

9,90 €
Tootekood:
11020

Me Touch Sensor is a capacitive touch sensor based on TTP223-BA6. It will be triggered by finger touch. You can also connect the "TOUCH" pinhole to some metal construction and touch the metal to trigger the sensor. The sensitivity is fixed to a proper level. If you need to adjust it to fit some special case, you can try to change the value of R3 and C4. It needs 0.5s for the self-calibration after energized. During that, please don't touch the sensor.

SONY Aku 2xAA 1,2V 2500 mAh

10,90 €
Tootekood:
AKU AA 2

AA suurusega Sony Ni-MH 2500 mAh mahutavusega akud - 2 tk pakis

SONY Aku 4xAA 1,2V 2500 mAh

17,90 €
Tootekood:
AKU AA 4

AA suurusega Sony Ni-MH 2500 mAh mahutavusega akud - 4 tk pakis

42BYG samm-mootor

24,90 €
Tootekood:
81042

Specifications:
PHASE : 2PHASE
STEP ANGLE : 1.8+-5%°/STEP
RATED VOLTAGE : 12V
CURRENT : 1.7A/PHASE
RESISRANCE : 1.5+-10%/PHASE
INDUCRANCE : 2.8+-20%mH/PHASE
HOLDING TORQUE : 40N.cm Min
DETENT TORQUE : 2.2N.cm Max
INSULATION CLASS : B
LEAD STYLE : AWG26 UL1007
ROTOR TORQUE : 54G.cm2

Me samm-mootori Driver

22,90 €
Tootekood:
12009

The Me Stepper Driver V1.0 is a easy to use stepper motor driver board based on chip A4988, generally used to drive bipolar stepper motors precisely. It is perfect for 3D printing, CNC, Makeblock Music Robot as well as a lot of other applications where it's necessary to control precise movement.

mBot lisakomplekt - Bluetooth moodul

18,90 €
Tootekood:
13035

This Bluetooth module is designed specially for individual users or family to play fun. You can use your smart phones or computers (Bluetooth enabled) to control the mBots wirelessly with this module.

Me 3-telje kiirendusandur ja güroskoop

24,90 €
Tootekood:
11012

Me 3-Axis Accelerometer and Gyro Sensor from Makeblock is a motion processing module. It can use to measure the angular rate and the acceleration information of your robot or other devices.

Me 3-Axis Accelerometer and Gyro Sensor is based on MPU-6050, it combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor™ (DMP) capable of processing complex 9-axis Motion Fusion algorithms.

Features:
* Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps

Me joonejälgimise moodul

17,90 €
Tootekood:
11044

Me Line Follower Array from Makeblock is specially designed for professional users who need to make line-following robots, such as makers. It has 6 pair infrared probes on which the high-precision comparators will compare the detected colors. Compared to Me Line Follower, it has higher precision. When black line on the white background is detected by the comparators, the LED light will turn on and the robot will move along the black line. On the contrary, when the white line on the black background is detected, robot will follow the white line.

Me kompass

12,90 €
Tootekood:
11024

Me Compass from Makeblcok is a 3-axis digital compass. The main chip is Honeywell HMC5883L. On-board regulator provides stable power for HMC5883L. We provide a library to initialize, calibrate, and read the data.

Features:
* Self-calibration
* I2C interface
* 2.54mm pin holes for connecting with Dupont wire
* Easy wiring with 6P6C RJ25 interface
* Arduino library for easy programming

Me leegi tuvastamise andur

7,90 €
Tootekood:
11036

Me Flame Sensor from Makeblock can be used to detect fire source or light source with wavelength in the range of 760 nm to 1100 nm. Its detection angle is up to 60 degrees, and detection accuracy can be adjusted. When the flame is detected, its blue indicator will light on. It can be applied to the safety monitoring projects such as fire-fighting robot and flame alarm. The port of this module has black ID, and RJ25 cable can used to connect to the port with black ID on Makeblock Orion.

Features:
* The detection distance is 1m when the height of flame is 5cm;

Me PIR liikumisandur

8,90 €
Tootekood:
11010

Me PIR sensor from Makeblock is used to detect motion from animals/humans from about 6m away. If anyone moved in that range, the sensor outputs HIGH on its SIG pin. With a potentiometersoldered on its circuit board, you can adjust its detecting range according to your need. Here are some ideas for application: motion detecting, thief-guarding system, automation switch.

Note: when you give it power supply,you may need to wait 10 seconds until the sensor Initialize.

Features:
* Adjustable detecting range and high sensity

Me temperatuuri ja niiskuse andur

9,90 €
Tootekood:
11032

Me Temperature and Humidity Sensor from Makeblock contains a calibrated digital signal output. It adopts specific digital module collecting technology and temperature-humidity sensing technology to ensure high reliability and excellent long-term stability. This module can measure the temperature from 0℃ to 50℃. Users can use it to build a cost-effective temperature and humidity monitoring system. Its yellow ID means that it has a single-digital port and needs to be connected to the port with yellow ID on Makeblock Orion.

Features:

Me temperatuuriandur (veekindel DS18B20))

8,90 €
Tootekood:
11014

This is the temperature sensor from Makeblock based on chip DS18B20 consisting of a waterproof probe and long wire shape, which is perfect for immersive temperature detectionor detectingg something far away.The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.

Mikrokontrolleri klamber

2,90 €
Tootekood:
14403

Makeblock Base Bracket is a kind of multi-purpose bracket which can use for Arduino, Meduino, and even Raspberry Pi.

Base Bracket B is bigger than Base Bracket A and has more holes to connect with electronic boards and mechanical parts. Additionally, the two biggest holes in the bracket will allow the RJ25 cables to go through.

Plastic Rivet 3075, Plastic Rivet 4060 and Plastic Rivet 4100 are included.

Patareide hoidja 6 x AA

3,90 €
Tootekood:
14000

6 x AA patareidehoidja Makeblockilt koos toitepistiku ja kaabliga: 20cm. Ideaalne Arduinole, ühildub Makeblock kontrolleri klambriga.

mBot lisakomplekt - 2.4G juhtmevaba moodul

24,90 €
Tootekood:
13030

This 2.4G Wireless Serial by Makeblock is designed for mBots to be used in classroom or workshop when many people use wireless communication simultaneously. It uses the same the techology as wireless mouse. With the feature of no pairing needed and no drivers needed, there is no signal interference when many modules work simultaneously. With two parts included: a dongle to plug on your computer (supports 32 & 64 bit Windows & Mac); a module to plug on the mCore, you can easily establish a wireless connection between the software mBlock and mBot.

MegaPi mikrokontroller

49,90 €
Tootekood:
10050

MegaPi is a microcontroller board from Makeblock based on ATmega2560. With abundant motor driver interfaces, it can control and combine different kinds of motors rapidly, drive 10 servos and 8 DC motors/ 4 stepper motors simultaneously and have a maximum output current of 10A.

MegaPi can be programmed with Arduino software (IDE) or graphical programming language. It is even better that MegaPi works perfectly with Raspberry Pi, by which makers will be able to drive motors and sensors with Python!

LED RGB riba - adresseeritav, 0,5m

7,90 €
Tootekood:
13404

This addressable RGB LED strip from Makeblock comes packed with 15 LEDs (0.5M). Except the features of high brightness and full color, you can control each LED RGB individually, and each of these strips are enclosed by a flexible silicon jacket to protect your LEDs . It is fashionable for you to create cool lighting effects for your home decorative, fish tank, your car or perhaps cabinet lighting in your kitchen.

Me Light valgusandur

8,90 €
Tootekood:
11007

Me Light Sensor from Makeblock is used to detect the light intensity. It's like a Me Light and Grayscale Sensor without the white LED. Almost the same function and usage, but a little cheaper. You can use it to make a intelligent dimming lamp, a laser communication system, or something cooler. The library is same as Me Light and Grayscale Sensor.

Features:
* Wide measuring range and high resolution
* 16mm interval M4 mounting holes, compatible with Makeblock beams
* 2.54mm pin holes for connecting with Dupont wire

Me RGB LED moodul

7,90 €
Tootekood:
13400

Me RGB LED from Makeblock is a shiny Me series module which has 4 full color ws2812 RGB LEDs. With integrated chip, you can control each LED individually to adjust its brightness and creat any color by mixing different amounts of red, green, blue. It is cost effective for you using in shiny lighting interative project such as decorating your robot or room.

Features:
* 4 full color RGB LED with intergrated chip which can be controled individually
* A built-in fuse protects the RGB LED from over current or any shortage by any reasons

Robootika alustuskomplekti lisakomplekt - ele...

37,90 €
Tootekood:
94010

The Electronic Add-on Pack from Makeblock is to expand on your Starter Robot Kit. There are 8 electronic modules in it. With this add-on pack and Starter Kit, you can create a lot of cool project. You can also implement several projects in Inventor Electronic Kit.

Part list:
1 x Me Light Sensor
1 x Me PIR Motion Sensor
1 x Me Temperature Sensor - Waterproof (DS18B20)
1 x Me RGB LED
1 x Me 7-Segment display - Red
1 x Me Joystick
1 x Me Potentionmeter
1 x Me RJ25 Adapter
2 x 6P6C RJ25 cable - 20cm

Me RJ25 adapter

3,90 €
Tootekood:
13801

Me RJ25 Adapter can convert 6P6C RJ25 connector to 2 common singnal connectors (which contains power interfaces and a signal interface). It can be used to connect modules from other manufacturers to Me series modules such as connecting temperture sensor to Me Baseboard, Me Micro Limit Switch to Me Baseboard.

Me ühendus Raspberry Pile

3,40 €
Tootekood:
10504

Me shield for Raspberry Pi is attached on the Raspberry Pi to give Me Baseboard or Makeblock Orion access with hardware serial communication.

* No soldering needed and ready to use
* Support Python programming
* Compatible with Model A,B, B+
* With a RJ25 connector for Me Baseboard or Makeblock Orion
* Come with header, without occupying GPIO pins

Me Sound heliandur

7,90 €
Tootekood:
11008

Me Sound Sensor is designed to detect the intensity of sound in the surrounding environment. You can use it in sound interative project such as a voice operated switch or build a dancing robot with music. Based on the power amplifier LM386 and the electret microphone, it can output analog values ranging from 0 to 1023. Due to a potentiometer, you can adjust the sensitivity according to different situations.

Features:
* Detect the intensity of sound in the surrounding environment
* Selectable sensitivity with a potentiometer

Pages

Swedbank SEB Nordea Maestro Visa/MasterCard