Me temperatuuriandur (veekindel DS18B20))

8,90 €

This is the temperature sensor from Makeblock based on chip DS18B20 consisting of a waterproof probe and long wire shape, which is perfect for immersive temperature detectionor detectingg something far away.The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor.

Mikrokontrolleri klamber

2,90 €

Makeblock Base Bracket is a kind of multi-purpose bracket which can use for Arduino, Meduino, and even Raspberry Pi.

Base Bracket B is bigger than Base Bracket A and has more holes to connect with electronic boards and mechanical parts. Additionally, the two biggest holes in the bracket will allow the RJ25 cables to go through.

Plastic Rivet 3075, Plastic Rivet 4060 and Plastic Rivet 4100 are included.

Patareide hoidja 6 x AA

3,90 €

6 x AA patareidehoidja Makeblockilt koos toitepistiku ja kaabliga: 20cm. Ideaalne Arduinole, ühildub Makeblock kontrolleri klambriga.

mBot lisakomplekt - 2.4G juhtmevaba moodul

24,90 €

This 2.4G Wireless Serial by Makeblock is designed for mBots to be used in classroom or workshop when many people use wireless communication simultaneously. It uses the same the techology as wireless mouse. With the feature of no pairing needed and no drivers needed, there is no signal interference when many modules work simultaneously. With two parts included: a dongle to plug on your computer (supports 32 & 64 bit Windows & Mac); a module to plug on the mCore, you can easily establish a wireless connection between the software mBlock and mBot.

MegaPi mikrokontroller

49,90 €

MegaPi is a microcontroller board from Makeblock based on ATmega2560. With abundant motor driver interfaces, it can control and combine different kinds of motors rapidly, drive 10 servos and 8 DC motors/ 4 stepper motors simultaneously and have a maximum output current of 10A.

MegaPi can be programmed with Arduino software (IDE) or graphical programming language. It is even better that MegaPi works perfectly with Raspberry Pi, by which makers will be able to drive motors and sensors with Python!

LED RGB riba - adresseeritav, 0,5m

7,90 €

This addressable RGB LED strip from Makeblock comes packed with 15 LEDs (0.5M). Except the features of high brightness and full color, you can control each LED RGB individually, and each of these strips are enclosed by a flexible silicon jacket to protect your LEDs . It is fashionable for you to create cool lighting effects for your home decorative, fish tank, your car or perhaps cabinet lighting in your kitchen.

mBot Korravalvur lisakomplekt - valgusmõõk

55,90 €

See lisakomplekt muudab sinu mBot Korravalvuri ""Tähtede sõja"" ehk Star Wars sarjas kasutatavaks ulmeliseks isetegijate valgusmõõgaks.
* Sisaldab erinevaid valmis programmeeritud valguseffekte nagu valgusmõõk, värve vahetav mõõk, vikerkaare mõõk ja palju muud.
* Valgusmõõka saab programmeerida mBlock ja Makeblock kaudu, mis võimaldab ise luua oma valgusprogramme.
* Lõputult mängurõõmu tänu nelja erineva juhtimisrežiimi toele sh güroskoop, heliandur, valgusandur ja puuteandur.

Me Light valgusandur

8,90 €

Me Light Sensor from Makeblock is used to detect the light intensity. It's like a Me Light and Grayscale Sensor without the white LED. Almost the same function and usage, but a little cheaper. You can use it to make a intelligent dimming lamp, a laser communication system, or something cooler. The library is same as Me Light and Grayscale Sensor.

* Wide measuring range and high resolution
* 16mm interval M4 mounting holes, compatible with Makeblock beams
* 2.54mm pin holes for connecting with Dupont wire

Me RGB LED moodul

7,90 €

Me RGB LED from Makeblock is a shiny Me series module which has 4 full color ws2812 RGB LEDs. With integrated chip, you can control each LED individually to adjust its brightness and creat any color by mixing different amounts of red, green, blue. It is cost effective for you using in shiny lighting interative project such as decorating your robot or room.

* 4 full color RGB LED with intergrated chip which can be controled individually
* A built-in fuse protects the RGB LED from over current or any shortage by any reasons

Robootika alustuskomplekti lisakomplekt - ele...

37,90 €

The Electronic Add-on Pack from Makeblock is to expand on your Starter Robot Kit. There are 8 electronic modules in it. With this add-on pack and Starter Kit, you can create a lot of cool project. You can also implement several projects in Inventor Electronic Kit.

Part list:
1 x Me Light Sensor
1 x Me PIR Motion Sensor
1 x Me Temperature Sensor - Waterproof (DS18B20)
1 x Me RGB LED
1 x Me 7-Segment display - Red
1 x Me Joystick
1 x Me Potentionmeter
1 x Me RJ25 Adapter
2 x 6P6C RJ25 cable - 20cm

Me RJ25 adapter

3,90 €

Me RJ25 Adapter can convert 6P6C RJ25 connector to 2 common singnal connectors (which contains power interfaces and a signal interface). It can be used to connect modules from other manufacturers to Me series modules such as connecting temperture sensor to Me Baseboard, Me Micro Limit Switch to Me Baseboard.

Me ühendus Raspberry Pile

3,40 €

Me shield for Raspberry Pi is attached on the Raspberry Pi to give Me Baseboard or Makeblock Orion access with hardware serial communication.

* No soldering needed and ready to use
* Support Python programming
* Compatible with Model A,B, B+
* With a RJ25 connector for Me Baseboard or Makeblock Orion
* Come with header, without occupying GPIO pins

Me Sound heliandur

7,90 €

Me Sound Sensor is designed to detect the intensity of sound in the surrounding environment. You can use it in sound interative project such as a voice operated switch or build a dancing robot with music. Based on the power amplifier LM386 and the electret microphone, it can output analog values ranging from 0 to 1023. Due to a potentiometer, you can adjust the sensitivity according to different situations.

* Detect the intensity of sound in the surrounding environment
* Selectable sensitivity with a potentiometer

RJ25 20cm kaablite komplekt (4tk)

2,90 €

6P6C RJ25 kaablite komplekt. Ühildub Makeblock elektrooniliste moodulitega. Pakis 4 kaablit, iga kaabli pikkus 20cm.

100mm Mecanum rataste komplekt

201,90 €

The 100mm Aluminum Mecanum Wheel Set (2 x Left, 2 x Right) includes 2 right wheels and 2 left wheels. Each wheel is composed of 9 rollers and can be driven independently. Mecanum wheels from Makeblock allow your robot to not only travel forward and backward, but also side to side. With 4 mecanum wheels, you can build a car/robot that can move in all direction. Each wheel of this pack comes with a compatible mounting hub - 4mm shaft connector, hence it will mate with our encoder motor or stepper motor easily.

25mm optilise enkooderiga mootorite komplekt ...

74,90 €

25mm Encoder DC Motor Pack from Makeblock includes two encoder motors, one encoder motor driver and two cables. In contrast to the DC motor, a photoelectric encoder is added into the encoder motor for detecting speed which is fed back to the signal input terminal for PID control to implement servo control for the motor.

36mm DC enkooderiga mootorite komplekt

261,90 €

36mm Encoder DC Motor Pack from Makeblock includes two encoder motors, one encoder motor driver and various brackets and cables. It is designed to drive all kinds of transmission devices with precise control over the speed and movement.

9g mikroservo lisakomplekt

6,90 €

"9g Micro Servo Pack from Makeblock is a servo pack for beginners who like to make stuff move , it contains a 9g servo, a servo hub, a servo bracket and hardwares. The 9g Micro Servo can rotate approximately 180 degrees, it works like standard servos but of course not as strong as a standard servo.

With the servo hub and servo bracket, it may be convenient to connect the servo with other parts. A Me RJ25 Adapter also help you to connect the servo with Me Baseboard easily."

Hammasrima ja -rataste lisakomplekt

31,90 €

Timing Belt Motion Kit from Makeblock contains frequently-used parts in building motion mechanisms.

Keermete lisakomplekt V2

37,90 €

Thread Drive Pack by Makeblock can be used to build thread drive system and includes Fully Threaded Rod M4x192mm/M4x288mm, Linear Motion Shaft 4x288mm, Thread Drive Beam, Universal Joint and DC Motor-25 6V/185RPM.

mBot lisakomplekt - LED maatriks ekraan

12,90 €

"This Me LED Matrix 8 x 16 from Makeblock is frequently-used together with mBot to color your experience of playing with the robot. It has has 128 blue LEDS packed into 16 x 8 dot matrix. This feature enables you to show your animations or characters clearly and brightly.

Find out more with this guide:"

Me kaksik DC mootori draiver V2.1

15,90 €

Me Dual DC motor driver from Makeblock can drive 2x DC motors with currents up to 2A peak and 1A continuous per motor. The driver is based around the TB6612PNG motor driver IC which features high-efficiency MOSFET H-bridges with overcurrent protection. This module is essential for interfacing the Robot Gripper from Makeblock to your next creation.

MG995 servo lisakomplekt

31,90 €

"MG995 Standard Servo Pack from Makeblock contains an MG995 standard servo, a Servo Hub, a servo bracket and some hardwares.

MG995 servo is a simple, commonly used standard servo for your mechanical needs. It comes with a stardard 3 pin power and control cable for easy using. With the servo hub and servo bracket, it may be convenient to connect the servo with other parts. A Me RJ25 Adapter also help you to connect the servo with Me Baseboard or Makeblock Orion easily."

Nurgikute lisakomplekt

31,90 €

Bracket Robot Pack from Makeblock contains most frequently used brackets and plates in Makeblock platform, which you can use to make special constructions for example with mBot, Arduino, Scratch 2.0 and other Robotics.


Swedbank SEB Nordea Maestro Visa/MasterCard