Makeblock

mBot kontroller mCore V1

39,90 €
Tootekood:
10041

What is mCore?
mCore is an easy-to-use main control board specially designed for mBot. Based on Arduino Uno, mCore integrates various onboard sensors, such as buzzer, light sensor, RGB LED, etc., which provides you an easier way to start learning electronics.

Features
• Comes with Arduino and Makeblock Library for easy programming.
• Include various featured sensors, such as buzzer, light sensor, RGB LED, etc.
• On-board USB type B connector design for long-time use.
• Resettable fuse prevents the board from getting burn.

Makeblock kaugusandur

24,90 €
Tootekood:
11001

Description:
The Me Ultrasonic Sensor V3.0 is the improvement version of Me Ultrasonic Sensor V2.0, better quality and perform more stable.
Me Ultrasonic Sensor can be used to measure distance or obstacle avoidance, from 3cm to 4m. With the Arduino library we provide, users can get the distance directly and use the module easily.

Features:
Comes with Arduino library for easy programming
Over-current protection
Easy wiring with 6 Pin RJ25 interface
Labeled with yellow tag and compatible with Me Base Shield and Me Baseboard

Airblock aku

31,90 €
Tootekood:
P1040007

The battery can be fully charged in about an hour when using the adaptor with the output of 5V2A.

Parameters:
* Cell: Lithium Polymer Battery
* Voltage: 7.4V
* Capacity: 700mAh
* Net Weight:41g(1.45oz)
* Product Dimension:63*26*23mm(2.5*1.0*0.9inch)
* Package Dimension:122*122*42mm(4.8*4.8*1.65inch)

Notice:
1. Charge Airblock with the specific adaptor only. Please remove the adaptor in time and keep the battery properly after fully charged.
2. Please pay attention to the direction of the battery when inserting it.

Airblock varuosad

3,90 €
Tootekood:
P1040001

Airblock MC-6A Propeller:
* Diameter: 55mm.
* Bore Diameter: 1mm.
* Quantity: Clockwise-rotating×8, Counterclockwise-rotating×8.
* Application: Propellers are used along with Airblock power modules. When replacing propellers, please be cautious that red and black propellers are not interchangeable.

Airblock MC-6A Power Module Foot Pad:
* Material: Silicone
* Quantity: Black×6, Red×2

Makeblock ME UNO laiendusplaat

12,90 €
Tootekood:
10031

Description:
This module is a shield of Arduino UNO. It can turn Arduino pins into Makeblock RJ25 ports. You can connect Arduino UNO with Makeblock electronic modules. This shield provides a stable power, so it can drive many servos and motors.

Features:
2.54mm pin holes for connecting with Dupont wire
Easy wiring with 6P6C RJ25 interface
Arduino library for easy programming

Specification:
Rated Voltage: 6V - 12V
Rated Current: 1.5A

mBot lisatarvikud

49,90 €
Tootekood:
P1020001

mBot lisatarvikud

64,90 €
Tootekood:
P1020002

Mootorreduktor TT DC 6V

4,90 €
Tootekood:
81320

Makeblock TT Geared Motor DC 6V/200RPM is the new power source with plastic gears in Makeblock platform. This TT Geared Motor fits perfectly with Makeblock Plastic Timing Pulley 62T and Plastic Timing Pulley 90T for the wheels system of DIY items. It can be used in Makeblock mBot as the power source.

Features:
* Support for positive and negative transfer.
* High accurateness in flow control.
* D(1.5-4)mm*0.5m silicone tube is included for using.
* Environmental protection silicone tube for food and medical industry.

Me 4 nupu moodul

6,90 €
Tootekood:
13602

Me 4 Button V1.0 is great for all kinds of projects, can work as function button or direction button to control your robots. There are 4 momentary buttons on the PCB board which have a great "click" to them. They all share an analog output and different analog values reflect different buttons. You can easily connect it to Me BaseBoard V1.0 or Me BaseShield V2.0 by 6 Pin RJ25 cable.

Me 7 segmendiline serial näidik - punane

9,90 €
Tootekood:
13402

Me 7-Segment Serial Display is a classic 4-digit common anode 7-segment display, it usually used to display numbers and a few special characters. You can easily use it in your robot project to show speed, time, the value of sensors, or scores. Me 7-Segment Serial Display is based on chip TM1637, you can control each segment and decimal point individually. Controlling each segment is not a complicated work, we have provided Arduino library for easy programming.

Me gaasiandur

9,90 €
Tootekood:
11028

Me Gas Sensor includes a smoke sensor of type MQ2 which has good repeatability, long-term stability, short response time, and durable working performance. It is often used as a gas leakage monitoring device in family and factory, and suitable for detecting Liquefied Natural Gas (LNG), butane, propane, methane, alcohol, hydrogen, smoke, etc. Its black ID means that it has an analog port and needs to be connected to the port with black ID on Makeblock Orion.

Me Potentiometer V1

4,90 €
Tootekood:
13604

This is a 50k dial type potentiometer with knob which can be rotated up to 270 degrees. It can convert rotary motion to an analog input which can be used to control the speed of a mobile robot, the brightness of RGB LEDs, or others.

Me puuteandur

9,90 €
Tootekood:
11020

Me Touch Sensor is a capacitive touch sensor based on TTP223-BA6. It will be triggered by finger touch. You can also connect the "TOUCH" pinhole to some metal construction and touch the metal to trigger the sensor. The sensitivity is fixed to a proper level. If you need to adjust it to fit some special case, you can try to change the value of R3 and C4. It needs 0.5s for the self-calibration after energized. During that, please don't touch the sensor.

SONY Aku 2xAA 1,2V 2500 mAh

10,90 €
Tootekood:
AKU AA 2

AA suurusega Sony Ni-MH 2500 mAh mahutavusega akud - 2 tk pakis

SONY Aku 4xAA 1,2V 2500 mAh

17,90 €
Tootekood:
AKU AA 4

AA suurusega Sony Ni-MH 2500 mAh mahutavusega akud - 4 tk pakis

42BYG samm-mootor

24,90 €
Tootekood:
81042

Specifications:
PHASE : 2PHASE
STEP ANGLE : 1.8+-5%°/STEP
RATED VOLTAGE : 12V
CURRENT : 1.7A/PHASE
RESISRANCE : 1.5+-10%/PHASE
INDUCRANCE : 2.8+-20%mH/PHASE
HOLDING TORQUE : 40N.cm Min
DETENT TORQUE : 2.2N.cm Max
INSULATION CLASS : B
LEAD STYLE : AWG26 UL1007
ROTOR TORQUE : 54G.cm2

Me samm-mootori Driver

22,90 €
Tootekood:
12009

The Me Stepper Driver V1.0 is a easy to use stepper motor driver board based on chip A4988, generally used to drive bipolar stepper motors precisely. It is perfect for 3D printing, CNC, Makeblock Music Robot as well as a lot of other applications where it's necessary to control precise movement.

mBot lisakomplekt - Bluetooth moodul

18,90 €
Tootekood:
13035

This Bluetooth module is designed specially for individual users or family to play fun. You can use your smart phones or computers (Bluetooth enabled) to control the mBots wirelessly with this module.

Me 3-telje kiirendusandur ja güroskoop

24,90 €
Tootekood:
11012

Me 3-Axis Accelerometer and Gyro Sensor from Makeblock is a motion processing module. It can use to measure the angular rate and the acceleration information of your robot or other devices.

Me 3-Axis Accelerometer and Gyro Sensor is based on MPU-6050, it combines a 3-axis gyroscope, 3-axis accelerometer, and a Digital Motion Processor™ (DMP) capable of processing complex 9-axis Motion Fusion algorithms.

Features:
* Tri-Axis angular rate sensor (gyro) with a sensitivity up to 131 LSBs/dps and a full-scale range of ±250, ±500, ±1000, and ±2000dps

Me joonejälgimise moodul

17,90 €
Tootekood:
11044

Me Line Follower Array from Makeblock is specially designed for professional users who need to make line-following robots, such as makers. It has 6 pair infrared probes on which the high-precision comparators will compare the detected colors. Compared to Me Line Follower, it has higher precision. When black line on the white background is detected by the comparators, the LED light will turn on and the robot will move along the black line. On the contrary, when the white line on the black background is detected, robot will follow the white line.

Me kompass

12,90 €
Tootekood:
11024

Me Compass from Makeblcok is a 3-axis digital compass. The main chip is Honeywell HMC5883L. On-board regulator provides stable power for HMC5883L. We provide a library to initialize, calibrate, and read the data.

Features:
* Self-calibration
* I2C interface
* 2.54mm pin holes for connecting with Dupont wire
* Easy wiring with 6P6C RJ25 interface
* Arduino library for easy programming

Me leegi tuvastamise andur

7,90 €
Tootekood:
11036

Me Flame Sensor from Makeblock can be used to detect fire source or light source with wavelength in the range of 760 nm to 1100 nm. Its detection angle is up to 60 degrees, and detection accuracy can be adjusted. When the flame is detected, its blue indicator will light on. It can be applied to the safety monitoring projects such as fire-fighting robot and flame alarm. The port of this module has black ID, and RJ25 cable can used to connect to the port with black ID on Makeblock Orion.

Features:
* The detection distance is 1m when the height of flame is 5cm;

Me PIR liikumisandur

8,90 €
Tootekood:
11010

Me PIR sensor from Makeblock is used to detect motion from animals/humans from about 6m away. If anyone moved in that range, the sensor outputs HIGH on its SIG pin. With a potentiometersoldered on its circuit board, you can adjust its detecting range according to your need. Here are some ideas for application: motion detecting, thief-guarding system, automation switch.

Note: when you give it power supply,you may need to wait 10 seconds until the sensor Initialize.

Features:
* Adjustable detecting range and high sensity

Me temperatuuri ja niiskuse andur

9,90 €
Tootekood:
11032

Me Temperature and Humidity Sensor from Makeblock contains a calibrated digital signal output. It adopts specific digital module collecting technology and temperature-humidity sensing technology to ensure high reliability and excellent long-term stability. This module can measure the temperature from 0℃ to 50℃. Users can use it to build a cost-effective temperature and humidity monitoring system. Its yellow ID means that it has a single-digital port and needs to be connected to the port with yellow ID on Makeblock Orion.

Features:

Pages

Swedbank SEB Nordea Maestro Visa/MasterCard