Makeblock

Me 7 segmendiline serial näidik - punane

9,90 €
Tootekood:
13402

Me 7-Segment Serial Display is a classic 4-digit common anode 7-segment display, it usually used to display numbers and a few special characters. You can easily use it in your robot project to show speed, time, the value of sensors, or scores. Me 7-Segment Serial Display is based on chip TM1637, you can control each segment and decimal point individually. Controlling each segment is not a complicated work, we have provided Arduino library for easy programming.

Me gaasiandur

9,90 €
Tootekood:
11028

Me Gas Sensor includes a smoke sensor of type MQ2 which has good repeatability, long-term stability, short response time, and durable working performance. It is often used as a gas leakage monitoring device in family and factory, and suitable for detecting Liquefied Natural Gas (LNG), butane, propane, methane, alcohol, hydrogen, smoke, etc. Its black ID means that it has an analog port and needs to be connected to the port with black ID on Makeblock Orion.

Me Potentiometer V1

4,90 €
Tootekood:
13604

This is a 50k dial type potentiometer with knob which can be rotated up to 270 degrees. It can convert rotary motion to an analog input which can be used to control the speed of a mobile robot, the brightness of RGB LEDs, or others.

Me puuteandur

9,90 €
Tootekood:
11020

Me Touch Sensor is a capacitive touch sensor based on TTP223-BA6. It will be triggered by finger touch. You can also connect the "TOUCH" pinhole to some metal construction and touch the metal to trigger the sensor. The sensitivity is fixed to a proper level. If you need to adjust it to fit some special case, you can try to change the value of R3 and C4. It needs 0.5s for the self-calibration after energized. During that, please don't touch the sensor.

Airblock aku

31,90 €
Tootekood:
P1040007

The battery can be fully charged in about an hour when using the adaptor with the output of 5V2A.

Parameters:
* Cell: Lithium Polymer Battery
* Voltage: 7.4V
* Capacity: 700mAh
* Net Weight:41g(1.45oz)
* Product Dimension:63*26*23mm(2.5*1.0*0.9inch)
* Package Dimension:122*122*42mm(4.8*4.8*1.65inch)

Notice:
1. Charge Airblock with the specific adaptor only. Please remove the adaptor in time and keep the battery properly after fully charged.
2. Please pay attention to the direction of the battery when inserting it.

Airblock varuosad

3,90 €
Tootekood:
P1040001

Airblock MC-6A Propeller:
* Diameter: 55mm.
* Bore Diameter: 1mm.
* Quantity: Clockwise-rotating×8, Counterclockwise-rotating×8.
* Application: Propellers are used along with Airblock power modules. When replacing propellers, please be cautious that red and black propellers are not interchangeable.

Airblock MC-6A Power Module Foot Pad:
* Material: Silicone
* Quantity: Black×6, Red×2

Makeblock ME UNO laiendusplaat

12,90 €
Tootekood:
10031

Description:
This module is a shield of Arduino UNO. It can turn Arduino pins into Makeblock RJ25 ports. You can connect Arduino UNO with Makeblock electronic modules. This shield provides a stable power, so it can drive many servos and motors.

Features:
2.54mm pin holes for connecting with Dupont wire
Easy wiring with 6P6C RJ25 interface
Arduino library for easy programming

Specification:
Rated Voltage: 6V - 12V
Rated Current: 1.5A

mBot lisatarvikud

49,90 €
Tootekood:
P1020001

mBot lisatarvikud

64,90 €
Tootekood:
P1020002

Mootorreduktor TT DC 6V

4,90 €
Tootekood:
81320

Makeblock TT Geared Motor DC 6V/200RPM is the new power source with plastic gears in Makeblock platform. This TT Geared Motor fits perfectly with Makeblock Plastic Timing Pulley 62T and Plastic Timing Pulley 90T for the wheels system of DIY items. It can be used in Makeblock mBot as the power source.

Features:
* Support for positive and negative transfer.
* High accurateness in flow control.
* D(1.5-4)mm*0.5m silicone tube is included for using.
* Environmental protection silicone tube for food and medical industry.

Makeblock kaugusandur

24,90 €
Tootekood:
11001

Description:
The Me Ultrasonic Sensor V3.0 is the improvement version of Me Ultrasonic Sensor V2.0, better quality and perform more stable.
Me Ultrasonic Sensor can be used to measure distance or obstacle avoidance, from 3cm to 4m. With the Arduino library we provide, users can get the distance directly and use the module easily.

Features:
Comes with Arduino library for easy programming
Over-current protection
Easy wiring with 6 Pin RJ25 interface
Labeled with yellow tag and compatible with Me Base Shield and Me Baseboard

Airblock MC-6A juhtiv tiivik-moodul

15,90 €
Tootekood:
P1040005

Parameters:
Propeller color: Red
Foot Pad color: Red
LED color: Red
Motor: Hollow-cup Motor, counter clockwise rotation
Corresponding position to main control module: 1, 3, 5
Net Weight:12g(0.42oz)
Product Dimension:88.5*80.5*44mm(3.5*3.2*1.7inch)
Package Dimension:122*122*42mm(4.8*4.8*1.65inch)

Notice:
1. Please refer to the User Manual to install the modules to the right position.
2. High speed rotating propellers may cause injury during running.

Airblock MC-6A tiivik-moodul päripäeva

15,90 €
Tootekood:
P1040004

Parameters:
Propeller color: Black
Foot Pad color: Black
LED color: Green
Motor: Hollow-cup motor, clockwise rotation
Corresponding position to main control module: 2, 4, 6
Net Weight:12g(0.42oz)
Product Dimension:88.5*80.5*44mm(3.5*3.2*1.7inch)
Package Dimension:122*122*42mm(4.8*4.8*1.65inch)

Notice:
1. Please refer to the User Manual to install the modules to the right position.
2. High speed rotating propellers may cause injury during running.

Airblock MC-6A tiivik-moodul vastupäeva

15,90 €
Tootekood:
P1040006

Parameters:
Propeller color: Red
Foot Pad clolr: Black
LED color: Green
Motor: Hollow-cup Motor, counter clockwise rotation
Corresponding position to main control module: 1, 3, 5
Net Weight:12g(0.42oz)
Product Dimension:88.5*80.5*44mm(3.5*3.2*1.7inch)
Package Dimension:122*122*42mm(4.8*4.8*1.65inch)

Notice:
1. Please refer to the User Manual to install the modules to the right position.
2. High speed rotating propellers may cause injury during running.

mBot kontroller mCore V1

39,90 €
Tootekood:
10041

What is mCore?
mCore is an easy-to-use main control board specially designed for mBot. Based on Arduino Uno, mCore integrates various onboard sensors, such as buzzer, light sensor, RGB LED, etc., which provides you an easier way to start learning electronics.

Features
• Comes with Arduino and Makeblock Library for easy programming.
• Include various featured sensors, such as buzzer, light sensor, RGB LED, etc.
• On-board USB type B connector design for long-time use.
• Resettable fuse prevents the board from getting burn.

Airblocki laadija

17,90 €
Tootekood:
0023390

Airblocki laadija

US-Euro toite ülemineku adapter maandusega

3,90 €
Tootekood:
ZLA0566A

Pistik EUR maandusega

Me joonejärgija

11,90 €
Tootekood:
11005

Me värviandur V1

8,90 €
Tootekood:
11050

The Me Color Sensor is a color sensor capable of recognizing a total of six colors, including black, white, red, blue, yellow, and green. This module's interface port is a standard blue-and-white, and uses I2C protocol for communication. It must be directly connected to a motherboard with a blue-and-white interface port.

Features:
The white region is a reference point for the attachment of the metal beam.
Contains reverse current protection; reverse current will not damage the IC.

Makeblock MakeX Starter võistluskomplekt (mBo...

199,90 €
Tootekood:
P1100010

Makeblock MakeX Starter "Blue Planet" robootika võistluskomplekt koos mBoti robotiga. See põhikomplekt sisaldab mBot robotit, võistlusandureid ja vajalikke lisatarvikuid, millega osaleda Robotexi võistlusel.

Komplekt sisaldab:
• 1x mBot kontroller mCore V1.5
• 1x mCore karp
• 1x mBot kere
• 2x mBot ratas
• 1x Me kaugusandur V3.0
• 1x Bluetooth moodul
• 1x Me LED maatriks ekraan V1.0
• 1x Me RGB joonejärgija V1.0
• 1x Me värviandur V1.0
• 1x 9g Micro Servo
• 1x Me RJ25 adapter V2.2
• 6x RJ25 20cm kaabel

180 optiline pöördkooder

14,90 €
Tootekood:
81340

180 optical encoder motor is equipped with optical encoder which enables motor to control in high-accuracy. And the unique structure makes this motor compliable with various parts. Meanwhile, due to the special materials, it produces lower noise while running and promises large output torque.

Makeblock Bluetooth adapter (BT4,0)

17,90 €
Tootekood:
P5010002

Makeblock Bluetooth dongle is a BT4.0 (low power consumption) interface converter for Bluetooth devices that is designed mainly for short-distance wireless data transmission.
The dongle can pair with any Makeblock devices with built-in Bluetooth modules, which offers users a smoother wireless experience.

Features:
1. USB interface, plug-in directly to achieve Makeblock Bluetooth wireless programming device;
2. Only for Makeblock Bluetooth devices;
3. High transmission efficiency, low latency data transmission;

Me audio helimoodul

17,90 €
Tootekood:
P3010002

Product Description:
1. Audio play module is compatible with all serial of Makeblock master control borads.
2. It has internal chip of speech decoder, and it can play music and record as well.
3. The color code of this module is white which means I2C signal control, and it needs to connect to the port with white color code on the master control board.
4. You can enjoy music after inserting a TF storage card.
5. It is easily used.

Features:
1. High sensitivity with sound.

Me Auriga kontroller

65,90 €
Tootekood:
10060

Me Auriga is the updated version of Orion which equipped with several sensors. The previous two red ports have been changed into four but remain the functions. Also, PORT5 is isolated only with serial communication function. So it can't be used to update program and is only for communication. Also, it is compatible with USB serial port. PORT6 to PORT10 are compatible with dual-digital, simulation, I2C bus, unibus, and simulated serial port. Me Auriga has encoder motor port, smart servo port and LED Ring Panel port (with power switch). Besides, the PCB is also enlarged.

Pages

Swedbank SEB Nordea Maestro Visa/MasterCard